Skip to product information
3D printed electric ukulele with a granite body, brown band and tan neck
  • 3D printed electric ukulele with a granite body, brown band and tan neck
  • Three 3D printed electric ukuleles in white, pink and blue, showing the kit printed in different filament colors
  • Electric ukulele DIY kit: the parts you 3D print and the hardware and electronics included
  • Concert-size electric ukulele: 15.5 inch scale length, 23 inches overall
  • Ukulele neck placed diagonally on a 340 × 320 mm print bed: large-format 3D printer needed
  • Ukulele body and small parts on a 256 × 256 mm print bed: fits standard 3D printers
  • Contents of the electric ukulele DIY kit: tuning pegs, strings, fret wires, threaded inserts, pickup, preamp, output jack and hardware
  • Ukulele preamp with built-in tuner, volume and 3-band EQ, with plug-in connectors so no soldering is needed
  • Tools needed: screwdriver with Phillips and 4 mm hex bits, 10 mm wrench, flush cutters and an optional clamp
Electric Ukulele Kit

Physical kit + 3D printing files

Electric Ukulele Kit

$99.00
Free U.S. Shipping

Build a real electric ukulele with a piezo pickup, 3-band EQ and built-in tuner. You 3D print the neck, body and small parts on a large-format printer, and we ship all the hardware and electronics.
Large printer needed
A print bed of at least 340 × 320 mm (ex: Bambu Lab H2S). The neck won't fit a standard 256 × 256 mm bed. Have a smaller printer? Get the Kit + Pre-Printed Neck.
Pre-Order

Ships by December 1. Your print files are emailed right after checkout, so you can start printing today.
  • Pre-order: ships by December 1
  • Digital download: 3MF files for the neck, body and small parts, plus STLs
  • Preamp batteries included and installed
  • Plug-in connectors — no soldering required
  • Assembles in under an hour
  • Step-by-step build guide (online or PDF) and video tutorial
  • Stuck on your build? Email us — we'll help you finish it

What's in the Box

All the hardware and electronics you need.

  • Tuning pegs ×4
  • Strap posts ×2
  • Ernie Ball clear nylon strings (ball end) Set
  • Nickel silver fret wires ×12
  • Threaded inserts ×2
  • Under-saddle piezo pickup, plug-in connector ×1
  • Preamp with tuner, volume, bass, mid, treble, plug-in connector ×1
  • 1/4 in output jack with battery compartment ×1
  • All mounting hardware Set

Batteries included: 2 × CR2032 3V coin cells, already installed in the output jack.

What You Print

You print the neck, body and small parts below.

RecommendedUse a 0.6 mm nozzle to significantly reduce print times.

Neck
Needs a print bed of at least 340 × 320 mm (ex: Bambu Lab H2S)
0.6 mm nozzle
~5 hr · ~280 g
0.4 mm nozzle
~10.5 hr · ~270 g
Body
Fits a 256 × 256 mm bed
0.6 mm nozzle
~6 hr · ~490 g
0.4 mm nozzle
~12.5 hr · ~410 g
Small Parts
Bridge, bridge saddle, nut and electronics cavity cover
0.6 mm nozzle
~1.5 hr · ~80 g
0.4 mm nozzle
~2 hr · ~60 g
Total Print
0.6 mm nozzle
~12.5 hr · ~850 g
0.4 mm nozzle
~25 hr · ~740 g
All parts can be printed in standard PLA, but really any material works. For extra strength you can print the neck in ABS or a fiber-reinforced filament (optional). For outdoor or hot conditions, we recommend a material like ASA.

From Printer to Playing

01

Print

Download your print-ready 3MF + STL files from the link in your order email, then print the neck, body and small parts in any color and material you like.

02

Build

Follow the easy step-by-step guide (online or PDF) and video tutorial. With just basic hand tools, it all comes together in under an hour.

03

Play

Tune with the onboard tuner, plug into any amp and start playing.

Specs

Size
Concert (~23 in overall)
Scale length
15.5 in
Frets
12
Strings
Ernie Ball clear nylon, ball end
Pickup
Under-saddle piezo
Controls
Volume, bass, mid, treble
Tuner
Built into preamp
Output
1/4 in jack
Power
2 × CR2032 coin cells
Batteries
Included and installed
Print bed needed
At least 340 × 320 mm
Assembled weight
~2 lb

Kit Questions

When will my kit ship?

This is a pre-order. Your kit ships by December 1. Your print files are emailed right after checkout, so you can start printing today.

Can I split the neck into sections?

We don't recommend splitting the neck to fit a smaller printer. The neck is designed as one piece because a joint creates a weak point that can flex under string tension. It prints diagonally on a bed of at least 340 × 320 mm (ex: Bambu Lab H2S). Have a smaller printer? The DIY Kit + Pre-Printed Neck comes with the neck already printed for you.

Do I need to solder?

No. The electronics use plug-in connectors — no soldering required. The piezo pickup plugs into the preamp, and the preamp plugs straight into the output jack. You'll just need a Phillips screwdriver, a wrench for the tuner hex nuts, and a wood clamp to press the fret wires into the neck.

How do I get the print files?

You'll receive an email with a download link right after checkout: 3MF files with print settings already set, plus STL files if you'd rather start from a blank slate. You can start printing the body while your hardware and neck are on the way.

What filament should I use?

All parts can be printed in standard PLA, but really any material works. If the ukulele will see outdoor sun or heat, we recommend a material like ASA, which resists both heat and UV.

Is there a build guide?

Yes. There's a step-by-step build guide online and as a PDF download, plus a video tutorial. See the build guide.

Not the Right Fit?

Kit + Pre-Printed Neck — $129Smaller printer? We print the neck for you. You print the body and small parts on a standard 256 × 256 mm bed. Fully Built — $199Skip the build. Ready to play out of the box.