Skip to product information
3D printed electric ukulele with a granite body, brown band and tan neck
  • 3D printed electric ukulele with a granite body, brown band and tan neck
  • 3D printed electric ukulele with a cable plugged into the output jack
  • Back of the 3D printed electric ukulele showing the granite body and brown band
  • Concert-size electric ukulele: 15.5 inch scale length, 23 inches overall
  • Ukulele preamp with built-in tuner, volume and 3-band EQ, with plug-in connectors so no soldering is needed
  • Output jack with built-in battery compartment holding two CR2032 coin cells
  • Close-up of the ukulele bridge and saddle with clear nylon strings
  • Close-up of the tan neck joining the granite body
  • Ukulele headstock with four tuning pegs and clear nylon strings
Fully Built Electric Ukulele

Fully assembled + ready to play

Fully Built Electric Ukulele

$199.00
Free U.S. Shipping

Every ukulele is 3D printed in our shop, then assembled and tested by hand. No printer, tools or assembly needed on your end. Open the box, tune with the onboard tuner, plug in and play.
Finish
Body: granite Band: brown Neck: tan Fretboard: brown
Pre-Order

Ships by December 7. Built to order and tested before it ships.
  • Pre-order: Built to order, ships by December 7
  • Assembled and tested before it ships
  • Preamp batteries included and installed
  • Plays unplugged, sounds best through an amp
  • Questions about your uke? Email us — we're happy to help

Plug In and Play

The same electronics as our kits, already installed and tested, so you can start playing right out of the box.

Piezo Pickup

Under the saddle for an even, natural tone across all four strings.

Onboard Preamp

3-band EQ (bass, middle, treble) and volume right on the body.

Built-In Tuner

Stay in tune on stage or on the couch, no clip-on needed.

Built and Tested

Assembled and tested before it ships.

In the box: assembled ukulele with Ernie Ball strings installed. Batteries (2 × CR2032) come installed. Instrument cable and gig bag are not included.

Specs

Size
Concert (~23 in overall)
Scale length
15.5 in
Frets
12
Strings
Ernie Ball clear nylon, ball end
Pickup
Under-saddle piezo
Controls
Volume, bass, mid, treble
Tuner
Built into preamp
Output
1/4 in jack
Power
2 × CR2032 coin cells
Batteries
Included and installed
Weight
~2 lb
Body Color
Granite with brown band

Questions

Can I play it unplugged?

Yes. It still sounds good unplugged, but for the best experience plug into an amp or PA.

How long until it ships?

This is a pre-order. Each ukulele is built to order and tested, and ships by December 7.

Does it come in other colors?

Right now it’s available in the granite finish with a brown band, exactly as shown. New colors, shapes and patterns are in the works. Join the list to hear first.

Rather Build Your Own?

DIY Kit — $99Print bed of at least 340 × 320 mm? Print the neck yourself. Kit + Pre-Printed Neck — $129Smaller printer? We print the neck for you. You print the body and small parts on a standard 256 × 256 mm bed.