Skip to product information
3D printed electric ukulele with a granite body, brown band and tan neck
  • 3D printed electric ukulele with a granite body, brown band and tan neck
  • Electric ukulele DIY kit: the parts you 3D print and the hardware and electronics included
  • Concert-size electric ukulele: 15.5 inch scale length, 23 inches overall
  • Ukulele body and small parts on a 256 × 256 mm print bed: fits standard 3D printers
  • Contents of the electric ukulele kit with the pre-printed tan neck, tuning pegs, strings, fret wires, pickup, preamp, output jack and hardware
  • Tan ukulele neck with a brown fretboard and white dot inlays, with the included fret wires and threaded inserts
  • Ukulele preamp with built-in tuner, volume and 3-band EQ, with plug-in connectors so no soldering is needed
  • Tools needed: screwdriver with Phillips and 4 mm hex bits, 10 mm wrench, flush cutters and an optional clamp
Electric Ukulele Kit + Pre-Printed Neck

Physical kit + 3D printing files

Electric Ukulele Kit + Pre-Printed Neck

$129.00
Free U.S. Shipping

Build a real electric ukulele with a piezo pickup, 3-band EQ and built-in tuner. The neck is too long for most print beds, so we print it for you. You 3D print the body and small parts.
Printer needed
A print bed of at least 256 × 256 mm (most standard printers). Every part you print is sized to fit.
Pre-Order

Ships by December 1. Your print files are emailed right after checkout, so you can start printing today.
  • Pre-order: ships by December 1
  • Digital download: 3MF files for the body and small parts, plus STLs
  • Preamp batteries included and installed
  • Plug-in connectors — no soldering required
  • Assembles in under an hour
  • Step-by-step build guide (online or PDF) and video tutorial
  • Stuck on your build? Email us — we'll help you finish it

What's in the Box

All the hardware and electronics, plus the pre-printed neck.

  • 3D printed neck Neck: tan Fretboard: brown Inlays: white ×1
  • Tuning pegs ×4
  • Strap posts ×2
  • Ernie Ball clear nylon strings (ball end) Set
  • Nickel silver fret wires ×12
  • Threaded inserts ×2
  • Under-saddle piezo pickup, plug-in connector ×1
  • Preamp with tuner, volume, bass, mid, treble, plug-in connector ×1
  • 1/4 in output jack with battery compartment ×1
  • All mounting hardware Set

Batteries included: 2 × CR2032 3V coin cells, already installed in the output jack.

What You Print

The neck comes pre-printed. You only print the parts below.

RecommendedUse a 0.6 mm nozzle to significantly reduce print times.

Body
Fits a 256 × 256 mm bed
0.6 mm nozzle
~6 hr · ~490 g
0.4 mm nozzle
~12.5 hr · ~410 g
Small Parts
Bridge, bridge saddle, nut and electronics cavity cover
0.6 mm nozzle
~1.5 hr · ~80 g
0.4 mm nozzle
~2 hr · ~60 g
Total Print
0.6 mm nozzle
~7.5 hr · ~570 g
0.4 mm nozzle
~14.5 hr · ~470 g
All parts can be printed in standard PLA, but really any material works. Print the body in any color you like. For outdoor or hot conditions, we recommend a material like ASA.

From Printer to Playing

01

Print

Download your print-ready 3MF + STL files from the link in your order email, then print the body and small parts in any color and material you like.

02

Build

Follow the easy step-by-step guide (online or PDF) and video tutorial. With just basic hand tools, it all comes together in under an hour.

03

Play

Tune with the onboard tuner, plug into any amp and start playing.

Specs

Size
Concert (~23 in overall)
Scale length
15.5 in
Frets
12
Strings
Ernie Ball clear nylon, ball end
Pickup
Under-saddle piezo
Controls
Volume, bass, mid, treble
Tuner
Built into preamp
Output
1/4 in jack
Power
2 × CR2032 coin cells
Batteries
Included and installed
Print bed needed
At least 256 × 256 mm
Assembled weight
~2 lb

Kit Questions

When will my kit ship?

This is a pre-order. Your kit ships by December 1. Your print files are emailed right after checkout, so you can start printing today.

Will it fit my printer?

If your printer has a 256 × 256 mm bed or larger, yes. Every part you print is sized to fit.

Do I need to solder?

No. The electronics use plug-in connectors — no soldering required. The piezo pickup plugs into the preamp, and the preamp plugs straight into the output jack. You'll just need a Phillips screwdriver, a wrench for the tuner hex nuts, and a wood clamp to press the fret wires into the neck.

How do I get the print files?

You'll receive an email with a download link right after checkout: 3MF files with print settings already set, plus STL files if you'd rather start from a blank slate. You can start printing the body while your hardware and neck are on the way.

What filament should I use?

All parts can be printed in standard PLA, but really any material works. If the ukulele will see outdoor sun or heat, we recommend a material like ASA, which resists both heat and UV.

Is there a build guide?

Yes. There's a step-by-step build guide online and as a PDF download, plus a video tutorial. See the build guide.

What color is the neck?

Wood tone with a brown fretboard and white dot inlays. Print the body in any filament color to match or contrast.

Not the Right Fit?

DIY Kit — $99Print bed of at least 340 × 320 mm? Print the neck yourself. Fully Built — $199Skip the build. Ready to play out of the box.