Seal the seams between the body sections with super glue to ensure the resin does not seep when poured.
Important: Allow time for the super glue to fully set before moving to the follow steps
Use a level to ensure your work surface is completely flat so that resin cures evenly.
Important: Check for level-ness in all directions
Mixing the resin. You can use any resin you choose, but I recommend Teexpert Epoxy (affiliate link) because it cures without a tint and is rock-solid.
Resin Volumes: Use the table provided below for approximate resin volumes to use.
Mix colors to get your perfect blend! I recommend this Mica Powder (affiliate link), because it is very affordable and comes with a great pallet of colors!
Recommendation: Add the mica powder to the Part A resin, then add Part B afterwards and mix thoroughly.
Carefully pour the resin mixture into the body recess.
Optional: Use a pointed stick to create a “swirl” pattern in the resin.
Recommendation: Perform this step multiple times as needed as the resin sets to ensure the swirl pattern will remain.
Allow a full 24 hours for the resin to fully cure/set.
