STRAT DOTS KIT

🔹 PRINT🔹

• Use your 3D printer to print the body components. Recommended print bed area is 256mm x 256mm (Ex Bambu Lab A1, P1P, X1C, and many more!)

• Kit includes the 3D printer files (STLs and 3mf files with printer settings pre-loaded).

• Use any color filaments you want! Solid, color changing, silk, marbled, wood, glow in the dark!

• Print time will vary based on several factors (printer, settings, model) but is ~35 hours in total to print all parts.

• Filament usage will also vary based on slicer settings and model but is typically less than 2kg (2 rolls) of filament.

🔹 BUILD🔹

• Easy assembly.

• Step-by-step instructions provided (below).

• This complete kit includes everything you need to build your guitar – neck, neck plate, bridge, pre-wired control panel (with quick connector), output jack (with quick connector), dowels, super glue,strap posts, all associated hardware, strings!

• Approximate guitar assembly time is ~1 hour.

🔹 PLAY🔹

• Plug the guitar into your amp and rock out!

What’s Included

• Download of 3D Print Files (STLs and 3mf)

  • 3mf files have 3D printer setting already pre-loaded so you can simply slice and print!

  • STL files can be used if you want to customize the print settings!

• Wooden Alignment Dowels

• Super Glue

• Genuine Stratocaster Squier Components

• Neck

• Neck Plate

• Bridge

• Pre-wire Electronics Panel (with Quick Connector) = No Soldering

• Output Jack (with Quick Connector) = No Soldering

• Strap Posts

• All Associated Hardware

• Ernie Ball Strings

Build Instructions

See build tutorial video below.